Water flame and how to do it

Posts: 188

	Tripled wrote:
	hmm, did you forget to adjust the timing on the lawn mower? it need's to be damn near top dead centre. you may need to do some "manual" adjusting of the mechanical link to get it done. Try the timing first before jumping all over the place to get it working. Tripled

I took the magneto off and tried it at every point including about 20 degrees before and after top dead centre! When it was firing it was slightly before top dead centre but wouldn't run properly. I'm gonna try it with the exhaust gas as I've been led to believe this will work, have you heard anything about this? I'm thinking this will provide extra pressure to force the gas into the cylinder, I will have to start it on petrol though I guess.

Posts: 181

just scanned this topic some more, i just thought i would mention, "YOUR DEALING WITH A HIGHLY FLAMABLE and EXPLOSIVE GAS MIXTURE" here boys and girls.

When your doing your plumbing, sticking tubes in a hole through the manifold does not cut it. You need proper connection's from start to finish when doing these setup's, ie: proper pressure tubing, connections etc etc.

As they say, "you will get burned if you play with fire"

As Jordan would say "You need to do you homework" BEFORE you start to play.

Having a proper setup before it actually start's powering your IC's is more important than getting it going right from the start. Then you can worry about proper mixture, timing etc etc afterwards, without worrying "to much" if it's going to blow.

"You put the goggle's and rubber glove's on properly, first! before you handle the acid."

Just a friendly reminder...

Tripled

PS: i just discovered you can't say g**gle in a post, how interesting...

Last edited by Tripled on Wed Aug 23, 2006 11:59 am; edited 1 time in total

Posts: 181

catfish wrote:

	Tripled wrote:
	hmm, did you forget to adjust the timing on the lawn mower? it need's to be damn near top dead centre. you may need to do some "manual" adjusting of the mechanical link to get it done. Try the timing first before jumping all over the place to get it working. Tripled

I took the magneto off and tried it at every point including about 20 degrees before and after top dead centre! When it was firing it was slightly before top dead centre but wouldn't run properly. I'm gonna try it with the exhaust gas as I've been led to believe this will work, have you heard anything about this? I'm thinking this will provide extra pressure to force the gas into the cylinder, I will have to start it on petrol though I guess.

I'm going to be putting some video on a tracker shortly dealing with this very thing, i think alot of people would be most interested with it. A hydrogen revolution thing.

Be patient though, a week or so. But timing and enough gas is the issue.

Tripled

Posts: 1334

Before it was posssible to mention them without bitching, now there is word filter due to recent problems.
You can still use word g00gle though Smile

its only because they are partial funding source for this site and there had been
clear attempt by "grace" to ruin it,
and recently some another $hit with persianpaladin

i will quote madthumbs:

	Quote:
	google hosts most of our videos, and pays me to use them!

Posts: 8599

	Quote:
	PS: i just discovered you can't say g**gle in a post, how interesting..

	http://www.opposingdigits.com/forums/viewtopic.php?t=14 wrote:
	Violations of affiliate TOS's is not permitted. This site is ad funded and must protect it's funding. If you feel there's a problem with our affiliates; you're welcome to pm me and others about it.

I needed the word censor help. Sorry.

Posts: 181

madthumbs wrote:

	Quote:
	PS: i just discovered you can't say g**gle in a post, how interesting..

	http://www.opposingdigits.com/forums/viewtopic.php?t=14 wrote:
	Violations of affiliate TOS's is not permitted. This site is ad funded and must protect it's funding. If you feel there's a problem with our affiliates; you're welcome to pm me and others about it.

I needed the word censor help. Sorry.

No problem here, i only discovered it after mispelling goggles..... lol

Cheers

Tripled

Posts: 181

hey catfish,

just been to your site, you getting any fishy looking vehicle's driving 'round your place lately?

Very Happy

BEGIN RANT:

had a look at that "Ed" fellows post's, man that fella really need's to get his "arse" out of his head... or is it the other way around?

"just exactly where the huck is Nitro plumbed into an engine?" christ, anyways, there's a man with absolutely no imaginative power beyond his wee little bubble.

to paraphrase: "I'm a f***ing expert with japanese high output powerfull engine's and there is no way in hell this will work" until YOU take all your time to PROVE to me that it work's then i will continue to knock anyone who continue's to filter any information that warps my wee little mind sphere of nothingness"

ok sorry, "END OF RANT" against ignorance.

keep at it catfish, piss off to anyone that does not have as much imagination to venture into taboo territory as you and your friends have.

don't worry about proving it to them, be concerned with DEMONSTRATING it to YOURSELF! and remember, it's people like THIS that rip stuff off people like yourself after YOU have done all the work.

sexual intercourse'em...

PS: ok i did not say sexual intercourse'em, ok? lol that's just something else doing all the talking for my choice of words. Sorry i get a little "torretish" when i read people like that.

Tripled

Posts: 181

	madthumbs wrote:
	Suzuki - Joe Cell + Peter Stevens Old Video JOE Cell - Hydrogen Generator ( Free Energy )

Thanks for that Peter Stevens link madthumbs, never seen that one before.

Tripled

Posts: 7

Hi

This technology has been around since the 1800s, its just that it was much more easily suppressed in those days, even right up to the dawn of the internet. But too many people are doing this now (ie. experimenting with all kinds of alternate energy) and it is impossible to police everyone. Don't believe that crap Alex Jones is spinning, it is designed for people to become subservient. You may face some problems if you start selling free energy devices though, rather than just fuel boosters and the like.

Posts: 8599

Video:

HHO Gas - Gasoline Replacement

Posts: 7

Hi again catfish,

I have a couple of questions for you. Using this gas, is it possible to cook with it or will it burn a hole through all things? How much water does it use, for example, with the torch?

Posts: 188

It burns holes in most stuff, and two kinds of fire brick we've tried just turned into glass!! The water makes (I'm told) 1800litres of gas from 1litre of water. Because we have frequently changed the construction and mix in the cell we've never noticed any real loss of water so I'm inclined to believe the 1800:1 ratio.
Cooking- I'm sure something will heat up good enough to cook on I've got a really thick copper bottomed stainless pan somewhere which I need to try, also different nozzles and stuff. Right now we're just trying different constructions, and different sizes of cell, and waiting for our pulse circuit.
Oh and we got the lawnmower running purely off water gas for about 40 seconds, but then it cuts out, I'm thinking the gas needs to be sucked into a vacuum maybe, or at least not get mixed with any air? It's strange because we can rev the engine with the gas or dawdle it but it still only lasts 40 seconds. Pretty cool though, we were dancing a little bit!

never thought before but i think the usa have made caustic soda illegal!!! anyone in the uk stock up now!

Posts: 181

yo catfish, you really REALLY want these two items:

S.A Meyer: The Birth of New Technology
Stanley A. Meyer: ANEX to "The Birth of New Technology

Tripled

Posts: 188

thanks again tripled. i'm hoping the download will speed up but i'll wait a week if it takes a week! Cheers dude. hello1

Posts: 181

	catfish wrote:
	thanks again tripled. i'm hoping the download will speed up but i'll wait a week if it takes a week! Cheers dude.

did you grab the demon or concen torrent?

Tripled