Colloidal silver , final solution?

Posts: 138

(edited , wait tll i finish the research, i still have to clear some electric doubts, conductivity , amount of water ,amount of silver )

Hello guys,

Long time without writting here xD. I´ve been busy in youtube making a strong group of informers . Daniliver channel aswell. The thing I wanted to comment today was something I have discovered recently (sad), but that has been between us for a long time.

The use of silver.
Silver seems to have properties to kill bacteria patogens and bad stuff. Silver coins was put in the barrels of water in the old sailor days to avoid the water to be rotten, also instead of having a fridge they used to put a silver coin inside the milk container.
The concept of blue blood , from royals comes from here . Seems they already knew this a loooong time ago, not a coincidence the silver spoons dishes etc was for high class.This is like an elite best secret ..

I don't know if you have ever seen a blue man in tv who got blue skin because he ingested too much silver ... Well thats just a scary thing the conspirator did to scary all of us goyim from finding out the truth.As you will see in your next research silver has curative uses. The methods used in the past were quite rudimentary but today we have electrolysis of silver in water.

In this procedure you have two rods of pure silver suspended in a cup with destilled water.Rods distance from each other 3cm . Applying a current of 27-30v will make very very little particles of silver giving water a yellow colour. There are a lot of videos in youtube about how to homemade your own colloidal silver as its known and many many info in the internet.

You can buy silver rods in ebay for 20$ , also 4x9v rechargeable batteries for 9$ , and also a dc-dc 40v-35v regulator for 7$,
The regulator is necessary to maintain the current at the same voltage/amps because when you put the rods at water is like making a shortcircuit and that increase of W will make the silver particles be too big for entering your cells. A solution of 10-15ppm will be perfect , that you can know buying an EC meter from ebay aswell xD 15$. God bless ebay. To get the real ppm multiply the result of the ec by 1000 and divide by 2 . PPM= (ECx1000) / 2

Its intake is using a spray , spray your mouth and skin . If drunk ,intake a very little amount enough to go through your goat without reaching the stomach because acids in the stomach will destroy the colloidal silver.
I haven´t tryied yet , already bought the components in internet and waiting for the tests , this is very new to me aswell but looks promising.

BB tyredness, bb fibromialgia , bb laziness , bb sickness , bb cloudy mind , bb heavy metals, bb mthrfkers conspirators.

Just some tips , remember that if water comes white that means you have dirty water , must be pure distilled water , clean well your rods and be sure what will be + and - and always use that way .Mark with electric tape if needed.
The longer it takes the more little particles of silver are. Dont go fast , 1h is good timing. Charge well the batteries before every use, this process drains a lot of power from them this is why is a wise choice to get rechargable batteries.

Only silver touching the water not the cables. Dont use coins or bars ,only pure silver 99,999% rods .
Warming the water from the bottom (as is shown in the following videos) of the glass will make the water to create an inner flow that stimulates the process.

Two good videos about the issue.

Cya and pls comment.

edited- Well I have more data, the particles must be very very little in order to reach your cells . If you place just the cables connected to the 9v battery the flow of energy will increase too much because when the solution is added more particles of metal the resistance of the water falls meaning the current goes faster than before. Think like if the water turns a big block of metal sudenly , well then you would have a shortcircuit because the resistance of the new solid water is 0 ohm. This is why you dont have a shortcircuit from the beggining because at the beggining the resistance of the water is 50000ohm.

The way to do this is to mantain a flux of energy under control.
A bit of junk research here from my side. There is a formula V=Amps x Resistance ohm. Yes , is not just about volts , two more elements intervene in this process Amps and Resistance of the object through the energy is flowing...
Lets think in energy like a flow of water . Think in a river , you have the amount of water , the speed of water flowing and the resistance/inclination of the terrain . How to find the force/push of the river?
That push is what makes little particles to leave the silver rod from the inside to the outside. Think in those particles like dandruff depending the amount of fingers you apply you get more dandruff and also how much pressure you put you get larger pieces of dandruff xD.

Ok now we have the idea of what is going to happen in a molecular level . The big problem of this issue of coloidal silver is to make the energy the right one in each moment of the process and I´m afraid this is a big big secret in the internet because I´ve been a week looking for clues and I´m still feeling like a noob.

The aproximations I found by other users is a pint of distilled water 500ml , two rods of pure silver 10 cm large by 2 mm , 30vdc ( you can get this figure using 4x9v batteries conected to a dcdc regulator as I said above and regulate manually to 30v with the multimeter test)
We are going to need aswell a multimeter and learn how to use it .This is a machine that can read the voltage , resistance of the circuit.Use to be yellow and its cheap.Manuals in youtube as usual xD.

Ok so we will have the voltage under control at 30vdc. Next we have to control is the amps . W=V x Amps.
Another figure I found in the net is between 0.5 to 1 milli amps (wow thats very little) . Ok so to get that amount of amps flowing we get the formula V=amps x ohm and we turn ohm=V/amps. This is ohm=30/0.0006=50000 or the same number as 50kohm when you try to buy in ebay.

In resume we need 30vdc , 0.6amps , 50kohm in the system constantly.
Good, then we go to ebay and we buy what is called a lineal potentiometer with 50k ohm. Its one of those like volume regulators we all have in the speakers. Cheap in ebay 1€.The connection is in the + side between the silver rod and the dc-dc regulator .

Now the final trouble I´m having is the separation of the silver rods . I still dont know how much separation need them and if you have to separate them a bit in the middle of the process.I have in mind that maybe is not necessary this to move them because we will use a fixed resistance of 50k ohm but the flow of water is very important.
The particles will be condensing between the rods , thats why is recommended a flow of the water using a heater in the button , that will create hot fluctuations . I saw an interesting video where a guy had a machine that rotated and into the solution he put some kind of piece of metal that spines in the water creating a vortex , very nice but sure the machine is expensive.

Thats all for now , stay tunned for when I have the circuits and stuff and I can make tests.

EDIT2: Ok then , things are getting clearer. I found a website dedicated to this issue http://www.silverlist.org/ its a bit of mess to find something but bit by bit I find new ideas to share with you.
For example the idea of adding a milk cream gadget, those that run with 2AA batteries and spin , making the water during the process to spin.That avoids the concentration of particles between the rods.
Another thing is that we don't need two silver rods but one. Yes because only from one rod , the positive is where the silver particles are coming , the other rod can be inox steel.
So if we buy two rods we can make two anodes and two catodes so the process will speed up . I was thinking to use an electric grid to wire the rods, this grid can fit perfect the borders of a glass and stay fix. Also in the middle to attach the milk cream gadget.I might add a 10kohm potentiometer so i can find the best apropiate speed. Distance between rods 2cm.Thanks to the 50k potentiometer and that the water will be moving we dont need to worry about condensation of particles between the rods.
Also the typhoon effect will trap the big particles and diposit in the middle of the base.

EDIT3>Today I received the silver bands from ebay . A bit dissapointed because they are very thin and I am sure this wont be practical because the water will be spinning. So I put in contact with seller and I will return them. Also I bougth new rods 2mm wide.
More tips on the building of the cs maker. The cathode can be just copper wire , we can use an ear cleaner with cutton and we make a cut in the plastic so we can insert the copper wire through the tube. This way the copper will have like a condom to avoid plattering , thats the dirty black usual in the cathode (negative side).Particles will be filtered by the cutton in one side.To make the process faster can add some of colloidal silver from previously.

EDIT4= Well I finally made the apparatus , I'm still waiting for those damn batteries , taking ages from hong kong. At least I was able to mount the final setup and I enclose a photo for demonstration.

[img]http://imageshack.us/photo/my-images/560/dscn1794q.jpg/[/img]

I havent tested anything yet but looks promising.

EDIT4/ Hi all, I finally got the 4 batteries and I've been making tests. Atm my attempts have been a failure. I have ordered another battery because I believe I'm still short in power , the voltage drops in the water to 23V using an output of 30v. Total capacity is 36V using 4 batteries and takes around one hour to drop the battery power to 30V which would be the amount of V necessary to make the colloidal.
Having in mind then that drops 6points of voltage per hour and the difference of voltage output /water V is 7v that means I need 13V more (50V). Luckily these Chinese batteries are a bit over powered and they have a rate of 10.3V . Using 4 I have 41.2V ,this is why I will need one more to have a proper setup and be allowed to launch 30v real to the water and maintain that for an hour. The dc-dc will have to generate around 37-40 volts for that.

EDIT 5- Ok everything is solved now. The problem was that i used that cathode inserted in an earing cleaner . Once substituted by another silver bar without protection the colloidal works. Another thing the hot water is not necessary . I have reduced voltage to 25V and 50khom, that makes very very little particles . The cathode that way is easier to clean as well just i pass a cotton without much effort and all the dark goes fast. I´m testing the effects now on my chickens they look a bit sick I think.
Another thing surprised me is that I put the coloidal in a plastic bottle and was exposed to sun light in the morning . The liquid was red when I came at home... Straight to the bin just in case... So no plastic . Glass and hidden from the light.
In the next edit I will comment on the effects on me and pets.

Edit 6- Hello again , After some time of self testing on me I can clearly see that this is 100% effective against flu or colds . I use it throught my nose with a spray and does the job the same day.I was expecting also a boost of energy due to some kind of detox but I'm sorry to say that didn't work on me.
I added to the cathode a cover using coffee paper in order to avoid the particle acomulation in the negative side.

Cya.